Embedding Accessories
Electron Microscopy Sciences Crystalbond™ 590 Adhesive Stick, Brown 225 GR
A temporary adhesive. These wash away adhesives are used as a temporary bond for holding delicate crystals, metallurgical specimens, glass components, and ceramic substrates for dicing, slicing, drilling and polishing. These materials adhere readily to metals, glass, ceramic and then can be washed after machining away using various solvents. For precise high purity work offers maximum adhesion to subminiature parts.
Color: Brown
Softening: 257°F (125°C)
Flow point: 302°F (150°C)
Viscosity: 9,000 cps
Electron Microscopy Sciences Flat Embedding Mold Small Flat Embedding Mold, 4 mm deep, 10 x 6 mm
A clear silicone rubber with very high tear strength. It can be reused more times than the conventional silicone molds. It is resistant to most epoxy resins and its clear base allows positioning of the specimen lighted from beneath. This mold produces 12 embedding blocks with tapered ends.
Depth: 4 mm
Size: 10 x 6 mm
Cavities: 12
Electron Microscopy Sciences Embedding Shelf for Shandon
This removable shelf can be installed below the opening of the cryostat in the most convenient and location available. The selves can be made in various sizes to accommodate most instruments.
Andwin Scientific RECTANGULAR MOLD 22X30MM 288CS
The rectangle Peel Away Disposable Embedding Molds are ideal for plastic or paraffin embedding. Block trimming is no longer required. This product has a dimension of 22 x 30 millimeters. It is sold in a case of 288.
Electron Microscopy Sciences Micro-Bed Embedding Resin 500 ML
Micro-Bed resin is a water-soluble resin, a mixture of acrylate and polyester resins. Universal embedding medium that may be used for light or electron microscopy.
Due to its non-crosslinking characteristics, its hydrophilic nature, and roughness of its section surface, it is excellent in preserving tissue structure, offers good results in immunolabeling, and stands up well to conventional stains.
In LM, tissues were stained with conventional histological stains (e.g.,hematoxylin-eosin) and embedded in Micro-Bed: results comparable with those provided on paraffin embedded tissues. Polychrome silver-based and cytochemical stains (e.g.,PAS) were also feasible. In TEM, images as good as those obtained with similar acrylic resins, (e.g., Lowicryl K4M), were obtained.
Supplied as a single component-ready to use pre-mixed resin. Micro-Bed can be polymerized by heat (55-65°C) or UV (365nm) at -10 to 20°C for 72 hours.
Adaptive Science Tools Microinjection Mold I-34
Six ramps used for micro-injection. Both sides are at a 90-degree angle firmly orienting the embryo.
Electron Microscopy Sciences Mold Release for Mounting Press 8 GR
Mold release agent to be used with mounting press.
Newcomer Supply Embedding Tissue Tampers Combo, 1 - 10mm x 10mm & 1 - 16mm x 19mm
Newcomer Supply’s Tissue Embedding Tampers are unique tools for flattening tissue sections in an embedding mold with ease! The design allows for the end-user to either use a forceps or their fingers to easily control the tampers. The aluminum, one piece handle extends 24mm above the tamper base and comes with a vinyl cap to help remain cool to the touch. There is also an anodized colored surface on the tamper that makes it more durable and corrosion-resistant. The tampers comes in two different sizes to accommodate small, medium and large embedding molds: 10mm x 10mm base (orange) and 16mm x19mm base (green). A combo pack is also available including 1 of each size.
Electron Microscopy Sciences Embedding Mold, Dykstra
EMS Embedding Mold is a new mold designed with Michael J. Dykstra Ph.D. from North Carolina State University Department of Veterinary Medicine. This Mold produces blocks of the best dimension to be held securely by Reichert/Leica Ultracut stepped microtome chucks. There are 24 cavities and the depth of each cavity is 4 mm which will prevent breakage of the blocks during razor blade trimming. Mold Measurements: 3 3/8" x 3" (85 x 77 mm. Cavity Measurements: 15 mmx 7 mm x 4 mm deep
Electron Microscopy Sciences Cold Embedding Silicone Mold for Acylic Resin 40 mm
This mold is for acrylic resins only and the best mounting cup for all of our acrylic resins. The flexible silicone rubber makes it very easy to remove the mount from the mounting cup.
Diameter: 40 mm
Electron Microscopy Sciences EMS Molded Flat Embedding Mold
Molds are injected molded polyethylene that is resistant to most embedding materials and will easily peeled-off the blocks. Mold fits perfectly inside the cocoon box BE8 (64300-8). These molds are reusable. Each cavity measures 12mm(L) x 5mm(W) x 3.5mm Deep. Overall mold measures: 94 x 56 x 14mm.
Electron Microscopy Sciences Thompson Monolayer Embedding Mold
This mold used for embedding mammalian cells in monolayer culture in preparation of sectioning for light or electron microscopy. Tissue culture monolayer embedding molds eliminate the need for traditional BEEM capsules. The improved molds can be used to transfer the majority of cells from the entire surface of a cover slip to avoid losses of large amounts of cellular information occurring only randomly. In addition, other problems such as surface blemishes caused by air entrapment associated with BEEM capsules are eliminated.